Knowledge Center for Utilities | UtilityGrid
UtilityGrid · Knowledge Center

Knowledge Center for Utilities

The UtilityGrid Knowledge Center provides practical guidance for evaluating and implementing Physical AI and Artificial Intelligence of Things (AIoT) in utility operations. Explore technical comparisons, equipment selection guidance, integration considerations, and evaluation methods for connected infrastructure, electrical assets, field operations, and utility equipment. Each resource addresses practical engineering and operational questions, helping teams assess technology choices, understand implementation requirements, and determine what needs to be validated in their own environments.

Explore the Knowledge Center ↘
⌁
Practical knowledge for connected utility infrastructure Assets · Sensing · Integration · Operations
About the Knowledge Center

Explore the Knowledge Center

The Knowledge Center brings together practical guidance for utility teams evaluating Physical AI and AIoT technologies. It covers asset identification, equipment monitoring, operational data, system integration, deployment, cybersecurity, and pilot evaluation.

Use the topic areas below to find guidance based on the challenge you are working through. The topics follow the path from identifying assets and collecting reliable data to integrating systems, evaluating decisions, and governing physical actions.

Knowledge Categories

Explore Knowledge and Technical Guidance

Explore practical guidance across the technology and operational considerations involved in connected utility infrastructure. Each topic helps teams understand requirements, evaluate available approaches, and identify what needs validation.

Start with your operational challenge. Choose the topic that best matches the asset, system, or implementation question you are working through.
01

Asset Identification and Location

Understand how radio-frequency identification (RFID), Bluetooth Low Energy (BLE), and ultra-wideband (UWB) can support asset identification and location use cases.

Compare their operating principles, infrastructure requirements, environmental considerations, and cost drivers. Select an approach based on the required level of identification or location detail rather than assuming one technology fits every site.

02

Sensing and Equipment Condition

Learn how to define the measurements a utility application needs and evaluate sensors against those requirements.

Consider measurement range, units, uncertainty, response time, installation conditions, calibration, drift, and data quality. Reliable monitoring starts with a clear understanding of what is being measured and how the resulting data will be used.

03

Operational Data and AI-Supported Decisions

Explore the considerations involved in turning equipment and operational data into useful information for planning and decision-making.

Assess data completeness, timing, context, and limitations before relying on an analytical output. Decision support should make its inputs and assumptions understandable to the people responsible for acting on the result.

04

Physical AI and Authorized Action

Understand the additional requirements that arise when an AI-enabled system can initiate or influence a physical action.

Consider authorization, operating boundaries, human oversight, interlocks, exception handling, and safe responses to faults or uncertain conditions. Any action pathway should be evaluated against the utility’s established procedures and safety requirements.

05

System Integration

Review the practical steps involved in connecting operational technology and enterprise systems, including supervisory control and data acquisition (SCADA), computerized maintenance management systems (CMMS), enterprise resource planning (ERP), and warehouse management systems (WMS), where relevant.

Define identifiers, event types, timestamps, units, interface responsibilities, and acknowledgement behavior. Plan for delayed, duplicated, rejected, or missing messages as well as normal data exchange.

06

Edge, Server, and Cloud Deployment

Compare deployment approaches by considering connectivity, response time, data handling, availability, maintenance responsibilities, expansion needs, and total operating costs.

Determine which functions need to run close to equipment, which can be hosted on site, and which may be suitable for cloud services. Include a plan for expected behavior during network interruptions and service recovery.

07

Pilot Planning and Evaluation

Build a pilot around a defined operational question, a realistic scope, and measurable success criteria.

Establish a baseline, identify the data needed, and test routine conditions as well as exceptions such as missing readings, communication outages, and recovery. Document responsibilities and decision criteria before testing begins. A successful demonstration or simulation should not be treated as a substitute for validation in the intended operating environment.

08

Cybersecurity and Operational Safeguards

Consider system boundaries, device and user identity, least-privilege access, protected communications, network segmentation, software updates, and logging.

Review how permissions are granted, how changes are controlled, and how faults or security events are handled. Safeguards should reflect the operational risk and the authority granted to each connected system.

Guidance by Role

Find Guidance for Your Role

Different teams evaluate technology from different operational and technical perspectives. Explore the guidance most relevant to your responsibilities.

01

For Utility Operations and Asset Leaders

Primary focus Operational fit, asset visibility, workflow impact, deployment responsibilities, and measurable pilot outcomes.

Guidance Use the guidance to frame requirements and identify the operational conditions that need to be tested.

02

For Engineers and Technical Teams

Primary focus Sensing requirements, identification methods, data quality, system interfaces, deployment architecture, and cybersecurity controls.

Guidance Define technical assumptions early and validate them against site conditions and existing infrastructure.

03

For Implementation and Project Teams

Primary focus Integration, deployment, pilot planning, system boundaries, exception handling, and acceptance criteria.

Guidance Coordinate stakeholders and make ownership clear for data, interfaces, maintenance, and operational approvals.

Evaluation Framework

A Practical Approach to Evaluation

Start with the operational question, not the technology. Define the asset, process, or decision that needs to improve, then identify the information required to support it.

01

Define the Operational Question

Identify the asset, process, or decision that needs to improve. Establish the operational objective and the problem that needs to be addressed.

02

Identify Required Information

Determine the information needed to support the application. Consider asset identity, measurements, data quality, timing, and available records.

03

Evaluate and Validate

Evaluate candidate technologies against site conditions, integration requirements, operating constraints, and lifecycle responsibilities.

Technical Assessment · Requirements · Site Conditions
Implementation Planning · Testing · Validation
Before deployment, agree on how performance will be measured, how exceptions will be handled, and who is authorized to approve changes or actions.
01

Define the Question

Start with a clearly defined operational or engineering question. Identify the asset, process, technology, or decision that needs to be evaluated.

02

Understand the Requirements

Review the relevant technical requirements, operating conditions, infrastructure limitations, and practical considerations before selecting a technology.

03

Identify Practical Limitations

Consider data quality, connectivity, equipment conditions, integration requirements, cybersecurity, and operational responsibilities.

04

Validate in the Intended Environment

Use the resources as a starting point for evaluation, then involve the appropriate engineering, operations, cybersecurity, and safety stakeholders before making implementation decisions.

Important Considerations

Technical Assessment and Site Validation

Knowledge resources support evaluation and implementation planning. Actual performance must be assessed against the conditions in which a solution will operate.

!

Validate Requirements in the Intended Utility Environment

The guidance in this Knowledge Center is intended to support technical assessment and implementation planning.

Actual performance depends on equipment, installation, environment, connectivity, configuration, data quality, and operating procedures.

Validate requirements and results in the intended utility environment before making implementation decisions.

Explore UtilityGrid

Explore Knowledge Areas

Explore the different technical and operational topics covered in the UtilityGrid Knowledge Center. Find guidance based on the requirements, systems, and challenges involved in your utility operations.

Knowledge and Implementation

Explore. Evaluate. Implement.

Use the UtilityGrid Knowledge Center to understand technical considerations, assess implementation requirements, and identify the next steps for evaluating Physical AI and AIoT in utility operations.

Back to Top ↑